CCHN ChemicalsChemical export sourcing from ChinaStart RFQ
Dearomatized Hydrocarbon Solvent D60/D80/D100, CAS 64742-47-8 sourcing visualNeeds CAS/spec and DG verification before buyer RFQ
Back to sourcing hubOrganic & Solvents

Dearomatized Hydrocarbon Solvent D60/D80/D100, CAS 64742-47-8

Buyer-facing sourcing profile for dearomatized hydrocarbon solvent grades D60, D80, and D100 listed under CAS 64742-47-8. Overseas buyers should verify CAS identity, grade distillation range, aromatic content, flash point, sulfur level, water content, color, odor, and documentation before RFQ or sample approval. Suitable for solvent, lubricant, textile auxiliary, coating auxiliary, aerosol, agrochemical formulation, fragrance carrier, and industrial processing checks where local regulations and application-specific purity requirements allow.

Quick buying facts

Identify the grade, package, and import market before comparing suppliers.

Use this page to check the product identity, common specification points, document scope, package notes, and destination-market questions before sending a China sourcing request.

CAS No.: 64742-47-8 listed; buyer should confirm exact petroleum distillate identity against SDS and COADearomatized hydrocarbon solvent / light liquid paraffin oil grade candidateNeeds CAS/spec and DG verification before buyer RFQ
Request quoteOpen sourcing hub
Identity and grade

Typical specifications

  • CAS No.: 64742-47-8 listed; buyer should confirm exact petroleum distillate identity against SDS and COA
  • Grades offered: D60, D80, D100; require grade-specific distillation range and flash point confirmation
  • Appearance: clear to white/light liquid as listed; request visual standard and color index
  • Aromatic content: request maximum aromatics, benzene, toluene, xylene, and total PAH data where relevant
  • Sulfur content: request ppm-level sulfur specification
  • Water content: request Karl Fischer or equivalent maximum value
  • Odor: request low-odor or odorless confirmation if intended for fragrance, cosmetic, aerosol, or personal-care supply chains
  • Density, viscosity, aniline point, bromine index, and evaporation rate should be provided per grade
  • Impurity profile: request heavy metals, halogens, residual aromatics, and unsaturated hydrocarbons if needed for regulated end use
  • EINECS, HS code, and formula shown in source appear inconsistent for this product category; verify official identifiers before purchase
Who uses this page

Target buyers

  • Industrial solvent distributors
  • Coating and ink formulators
  • Textile auxiliary manufacturers
  • Aerosol and household product manufacturers
  • Agrochemical formulation companies
  • Lubricant and process oil buyers
  • Fragrance and personal-care raw material sourcing teams requiring additional compliance review
  • Chemical importers seeking China-origin hydrocarbon solvent supply
Before matching

Documents to check

  • CAS number, grade, assay, and impurity profile
  • SDS, COA, TDS, HS code, and transport classification
  • Destination-market import documents before supplier matching
Package and route

Packing notes

  • Source listing mentions 25 kg bag or customized packaging, which may be unsuitable for liquid solvent; confirm actual liquid packing format
  • Request available packing such as 160 kg drum, 170 kg drum, 180 kg drum, IBC, ISO tank, or sample bottle as applicable
  • Confirm drum material, UN-rated packaging status if classified as dangerous goods, palletization, seal type, and leak-test documentation
  • For samples, confirm sample volume, packaging compatibility, courier acceptance, and export documentation before shipment
  • Ask whether neutral/OEM labels are available only where compliant with buyer import and traceability requirements
Applications and sourcing options

Check whether this product fits the buyer's actual application.

Clear application, grade, package, and document notes help separate real sourcing demand from a vague price check.

Use context

Common applications

  • Industrial solvent carrier where low aromatic content is specified
  • Coating, ink, and resin dilution after formulation compatibility testing
  • Textile auxiliary and coning oil formulation
  • Aerosol and agrochemical carrier solvent subject to DG and regulatory review
  • Lubricant, plasticizer, and process oil applications requiring grade-specific viscosity and odor checks
  • Fragrance or personal-care supply chain screening only after impurity, odor, and regulatory documentation review
How we compare

Sourcing options

  • Request sample with COA and SDS before bulk RFQ
  • Compare D60, D80, and D100 by flash point and evaporation profile
  • Ask for refinery-direct or fixed-origin supply if batch consistency is critical
  • Use third-party inspection for aromatic content, flash point, and packaging integrity
  • Request FOB China port, CIF destination port, and DDP feasibility only where compliant with DG and customs requirements
  • Consider alternate CAS or grade if destination market requires a different hydrocarbon solvent identity
Human review

Compliance notes

  • Request current SDS in GHS format, COA for each batch, TDS, certificate of origin, packing list, commercial invoice, and transport classification statement
  • Confirm UN number, hazard class, packing group, marine pollutant status, flash point, and DG/non-DG determination for the specific grade
  • Check REACH, UK REACH, TSCA, DSL/NDSL, AICS/AIIC, IECSC, K-REACH, ENCS, PICCS, and other inventory status according to destination market
  • Do not rely on the marketplace title alone for cosmetic, food-contact, pharmaceutical, or personal-care use; request grade-specific regulatory and impurity support
  • If intended for cosmetics, fragrance, food-grade lubricant, aerosol, or agrochemical use, confirm application suitability with buyer-side regulatory review
  • Verify that CAS 64742-47-8 and associated petroleum distillate descriptors match import declaration, SDS Section 3, and local customs requirements
  • No regulatory approval or import clearance is guaranteed by this profile; buyer must validate destination-specific restrictions and documentation
Buyer search paths

Related sourcing terms

These terms support long-tail discovery while keeping the page focused on useful product and China export buying context.

hydrocarbon solvent supplierdearomatized hydrocarbon solventD60 solventD80 solventD100 solventCAS 64742-47-8light liquid paraffin oillow aromatic solventisoparaffinic solventpetroleum distillate solventindustrial solvent China supplier
Related product options

Build a broader quote package from adjacent options.

Buyers often compare neighboring grades, forms, or route options before sending one consolidated RFQ.

Export Grade Xylene Solvent CAS 1330-20-7 for Industrial Leather and Coatings Use sourcing visual
Industrial aromatic solvent / xylene mixed isomers

Export Grade Xylene Solvent CAS 1330-20-7 for Industrial Leather and Coatings Use

Industrial grade xylene solvent candidate for overseas buyers requiring CAS 1330-20-7 confirmation, isomer profile review, COA/MSDS document readiness, and export packing options such as drums or IBC tanks. Suitable for RFQ screening where grade, purity, moisture, sulfur or aromatic impurity limits, DG classification, and destination-country import requirements must be checked before purchase.

Aerosol Chain Lube & Cleaner, 400 mL, Solvent Naphtha/LPG Based sourcing visual
Aerosol chain lubricant and cleaner / solvent-based maintenance chemical

Aerosol Chain Lube & Cleaner, 400 mL, Solvent Naphtha/LPG Based

Buyer-facing sourcing candidate for an aerosol chain lube and cleaner supplied in 300–500 mL cans, with listed 400 mL option. Declared formulation basis includes 200# solvent naphtha, surfactant, water, and LPG propellant, with aromatic odor and specific gravity around 0.75–0.80 g/cm³. Suitable RFQs should request exact CAS composition disclosure, solvent grade details, aerosol DG classification, SDS/TDS, COA parameters, export packing confirmation, and destination-market document readiness.

3,4-Dichlorotoluene CAS 95-75-0 Industrial Grade 99.5% Candidate sourcing visual
Chlorinated aromatic intermediate / industrial organic intermediate

3,4-Dichlorotoluene CAS 95-75-0 Industrial Grade 99.5% Candidate

Buyer-facing sourcing candidate for 3,4-Dichlorotoluene, CAS 95-75-0, offered as a colorless liquid industrial organic intermediate with stated main content of 99.5% and 200 kg drum packing. Overseas buyers should verify CAS identity, isomer profile, assay method, impurity limits, SDS, COA, export documentation, and transport classification before RFQ confirmation.

Coal-Based Pellet Activated Carbon for Industrial Adsorption and Solvent Recovery sourcing visual
Coal pellet activated carbon

Coal-Based Pellet Activated Carbon for Industrial Adsorption and Solvent Recovery

Coal-based pellet activated carbon candidate for buyers checking industrial adsorption media for gas-phase purification, water treatment, and solvent recovery systems. The listing references CAS 7440-44-0, pellet/columnar form, iodine value ranges, CTC activity, ash, moisture, strength, density, and multiple pellet diameters. Buyer verification should focus on current COA data, application-specific impurity limits, export documents, packing format, and whether the grade is suitable for the intended adsorption duty.

RFQ questions before supplier matching

Turn this product into a quote request.

Share target market, quantity, packaging scope, artwork status, delivery destination, and required documents so CHN Chemicals can prepare a cleaner supplier comparison.

Questions to confirm
  • Which exact grade is quoted: D60, D80, D100, or another dearomatized solvent cut?
  • Please provide the latest COA, SDS, TDS, and grade-specific specification sheet for CAS 64742-47-8.
  • What are the distillation range, flash point, density, viscosity, aromatic content, sulfur content, water content, color, and odor values?
  • Is benzene absent or below a defined limit? Please provide test method and detection limit.
  • What is the actual packing for liquid product: drum, IBC, ISO tank, or sample bottle?
  • Is the product classified as dangerous goods for sea, air, road, or rail transport? Please provide UN number or non-DG certificate if applicable.
  • Can you provide batch traceability, production date, retest date, and retained sample policy?
  • What is the minimum order quantity for samples and bulk orders by destination country?
Checks before quote
  • Request current SDS in GHS format, COA for each batch, TDS, certificate of origin, packing list, commercial invoice, and transport classification statement
  • Confirm UN number, hazard class, packing group, marine pollutant status, flash point, and DG/non-DG determination for the specific grade
  • Check REACH, UK REACH, TSCA, DSL/NDSL, AICS/AIIC, IECSC, K-REACH, ENCS, PICCS, and other inventory status according to destination market
  • Do not rely on the marketplace title alone for cosmetic, food-contact, pharmaceutical, or personal-care use; request grade-specific regulatory and impurity support
  • If intended for cosmetics, fragrance, food-grade lubricant, aerosol, or agrochemical use, confirm application suitability with buyer-side regulatory review
  • Verify that CAS 64742-47-8 and associated petroleum distillate descriptors match import declaration, SDS Section 3, and local customs requirements
  • No regulatory approval or import clearance is guaranteed by this profile; buyer must validate destination-specific restrictions and documentation
Next step

Send the product page with your target quantity and market. A sourcing manager can then confirm sample options, supplier fit, packaging details, and open document gaps.