24,000 L Flexitank / Flexibag for Bulk Liquid Logistics in 20 ft Containers
Single-use flexitank candidate for bulk liquid transport in standard containers, positioned for food-grade liquids, industrial liquids, oils, non-hazardous chemicals, additives, resins, detergents, polyols, glycerin, latex, and water-based products. Buyer checks should focus on liquid compatibility, loading/discharge configuration, PE inner layer specification, valve type, container fit, documentation availability, and whether the cargo is accepted as non-dangerous for the intended export route.
Quick buying facts
Identify the grade, package, and import market before comparing suppliers.
Use this page to check the product identity, common specification points, document scope, package notes, and destination-market questions before sending a China sourcing request.
Nominal capacity: commonly offered around 24,000 L for 20 ft container use; supplier also lists 6–33 CBM configurationsBulk liquid packaging / flexitank for containerized logisticsCandidate for sourcing review
Nominal capacity: commonly offered around 24,000 L for 20 ft container use; supplier also lists 6–33 CBM configurations
Structure: multi-layer PE inner liner with PP outer woven/coated fabric
Inner material: food-grade PE stated by supplier; request material declaration and migration or food-contact documentation where relevant
Outer material: wear-resistant PP coating fabric, single outer layer stated
Loading/discharge options: top load top discharge, top load bottom discharge, bottom load bottom discharge
Valve options: PP valve, 3 inch or 4 inch; ball valve, butterfly valve, or automatic valve stated
PE inner appearance requirement: translucent, smooth surface, no visible impurities, pollution, wrinkles, particles, ribs, or blisters
PE tensile strength stated: ≥43.3 MPa
PE elongation at break stated: ≥12
Temperature resistance claims vary in source text: -45°C to 130°C in inspection table and -45°C to 150°C in FAQ; confirm actual rated range in writing for the cargo temperature profile
PP outer fabric gram weight stated: 75 ±5 g/m²
Air tightness: supplier states no leakage at heat-sealing line and valve seal under inflation test
Who uses this page
Target buyers
Bulk liquid importers and exporters
Chemical distributors handling non-hazardous liquids
Food oil, syrup, glycerin, sorbitol, and polyol exporters
Lubricant, base oil, and industrial oil shippers
Detergent, surfactant, water-based paint, latex, and resin logistics teams
Freight forwarders and 3PL providers managing containerized liquid cargo
Procurement teams comparing flexitank, IBC, drum, and ISO tank options
Before matching
Documents to check
CAS number, grade, assay, and impurity profile
SDS, COA, TDS, HS code, and transport classification
Destination-market import documents before supplier matching
Package and route
Packing notes
Transport package listed as rigid carton packaging
Per-set volume stated around 0.4 m³
Net weight stated around 40–43 kg per unit
Gross weight stated around 100–120 kg per set; clarify whether this includes accessories such as bulkhead, corrugated paper, steel tube, barrier plate, adhesive tape, strapping tape, and warning labels
Designed for installation in 20 ft and potentially 40 ft containers; confirm container size, payload limit, and liner dimensions before order
Supplier lists accessories including corrugated paper, bulkhead, steel tube, adhesive tape, barrier plate, strapping tape, and warning labels
Confirm whether packaging is suitable for ocean export, container stuffing at origin, and destination discharge requirements
Applications and sourcing options
Check whether this product fits the buyer's actual application.
Clear application, grade, package, and document notes help separate real sourcing demand from a vague price check.
Use context
Common applications
Containerized export of non-hazardous liquid cargo in a 20 ft container
Bulk movement of edible oils, syrups, glycerin, sorbitol, and other food or feed liquids subject to documentation review
Shipment of industrial oils, base oils, lubricants, plasticizers, polyols, detergents, surfactants, latex, and water-based materials after compatibility confirmation
Cost comparison against drums, IBCs, and ISO tanks for one-way liquid logistics
Temporary bulk liquid storage only where container, site rules, and cargo compatibility permit
How we compare
Sourcing options
24,000 L flexitank for 20 ft container
6–33 CBM flexibag configurations depending on cargo density and container limits
Top load top discharge configuration
Top load bottom discharge configuration
Bottom load bottom discharge configuration
3 inch or 4 inch PP valve options
Food-grade PE inner liner option subject to document verification
Accessory kit including bulkhead, corrugated board, steel tube, barrier plate, tape, strapping, and warning labels
Human review
Compliance notes
This listing is for a logistics packaging product, not a chemical substance; CAS number checks apply to the buyer’s liquid cargo, not the flexitank itself
Request material composition declaration for PE inner liner, PP outer layer, valve, seal ring, and any adhesives or coatings that may contact cargo
For food or feed liquids, request food-contact compliance documents relevant to the destination market, plus batch COA or conformity statement for the liner materials
For Kosher, Halal, CE, ISO, or other claims, request certificate copies and verify that they apply to the exact flexitank model and production site
For chemical cargo, confirm compatibility with the cargo SDS, concentration, impurity profile, temperature, viscosity, density, and loading/discharge method
Do not rely on broad claims such as suitable for acids, alkalis, or corrosive liquids without written compatibility review and carrier acceptance
DG classification depends on the cargo, not the flexitank; request SDS review and written confirmation of whether the shipment is accepted as non-dangerous or dangerous goods on the intended route
Check HS code 39232900 applicability with customs broker for the packaging product and destination rules
Buyer search paths
Related sourcing terms
These terms support long-tail discovery while keeping the page focused on useful product and China export buying context.
bulk liquid logistics Chinaflexitank China supplierflexibag for 20ft container24000L flexitankfood grade PE flexitanknon hazardous chemical flexitankbulk liquid container linerliquid logistics packagingcontainerized liquid transportPP PE flexibagtop load bottom discharge flexitankbulk liquid export packaging
Related packing and logistics options
Build a broader quote package from adjacent options.
Buyers often compare neighboring grades, forms, or route options before sending one consolidated RFQ.
Share target market, quantity, packaging scope, artwork status, delivery destination, and required documents so CHN Chemicals can prepare a cleaner supplier comparison.
Questions to confirm
What is the exact model offered for 24,000 L use in a 20 ft container, and what is the validated maximum payload by liquid density?
Can you provide the full technical data sheet, drawings, layer structure, PE thickness, valve specification, and installation accessory list?
Which loading/discharge configuration is recommended for our cargo: top/top, top/bottom, or bottom/bottom?
Can you confirm compatibility for our cargo based on SDS, CAS number, concentration, density, viscosity, pH, temperature at loading, and transit duration?
Is the flexitank intended only for non-hazardous liquids, or are any DG cargoes accepted with special review?
Can you provide current ISO, COA, food-contact, Kosher, Halal, CE, and product liability insurance documents for this exact product and factory?
What inspection tests are performed per batch or lot, including air tightness, tensile strength, puncture resistance, heat-seal integrity, valve pressure, and drop or vibration tests?
What is the standard packing quantity per shipment, carton dimensions, gross weight, lead time, and MOQ?
Checks before quote
This listing is for a logistics packaging product, not a chemical substance; CAS number checks apply to the buyer’s liquid cargo, not the flexitank itself
Request material composition declaration for PE inner liner, PP outer layer, valve, seal ring, and any adhesives or coatings that may contact cargo
For food or feed liquids, request food-contact compliance documents relevant to the destination market, plus batch COA or conformity statement for the liner materials
For Kosher, Halal, CE, ISO, or other claims, request certificate copies and verify that they apply to the exact flexitank model and production site
For chemical cargo, confirm compatibility with the cargo SDS, concentration, impurity profile, temperature, viscosity, density, and loading/discharge method
Do not rely on broad claims such as suitable for acids, alkalis, or corrosive liquids without written compatibility review and carrier acceptance
DG classification depends on the cargo, not the flexitank; request SDS review and written confirmation of whether the shipment is accepted as non-dangerous or dangerous goods on the intended route
Check HS code 39232900 applicability with customs broker for the packaging product and destination rules
Next step
Send the product page with your target quantity and market. A sourcing manager can then confirm sample options, supplier fit, packaging details, and open document gaps.
