European Union: Brussels Prepares New CLP Update Affecting Over 100 Chemical Substances

Key facts
- The European Commission launched a public consultation on October 27, 2026, to amend Annex VI of the CLP Regulation
- The draft regulations propose adding 49 new entries and modifying 58 others, affecting approximately 107 chemical substances
- The consultation period remains open until November 24, 2026, with text adoption scheduled for the second quarter of 2027
- The amendments focus on classifying substances based on endocrine disruption, PBT, and vPvB properties under EU law
The European Commission has launched a public consultation on two draft delegated regulations aimed at amending Annex VI of Regulation (EC) No 1272/2008, the CLP Regulation, which sets out the criteria for classifying, labelling and packaging chemical substances and mixtures within the European Union.
Published on October 27, 2026, the initiative seeks to integrate into the European harmonised classification system substances whose hazardous properties have already been assessed under other Community provisions.
Specifically, the drafts propose adding 49 new entries and modifying or replacing 58 others in the CLP harmonised classification table, affecting approximately 107 substances. The properties under consideration include endocrine disruption for human health or the environment, as well as persistence, bioaccumulation and toxicity (PBT), and very high persistence and bioaccumulation (vPvB).
The public consultation period for the European Commission will remain open until November 24, 2026. According to the indicative timeline for the initiative, the adoption of the texts is scheduled for the second quarter of 2027. At this stage, both documents are proposals and do not impose any new obligations on companies.
Brussels is preparing a new update to the Classification and Labelling of Substances and Mixtures Regulation, which will impact more than a hundred chemical substances.
The initiative relies on Article 37.7 of the CLP Regulation, which empowers the European Commission to add specific substances to Annex VI that have already been identified under other European legislative frameworks. These frameworks include the REACH Regulation, the legislation governing plant protection products, and the Biocidal Products Regulation.
The aim is to prevent authorities from duplicating hazard assessments when a substance’s properties have already been examined and recognized under equivalent criteria in other Community provisions. The measure thus aligns with the European approach of “one substance, one assessment,” which seeks to enhance consistency across the various procedures for chemical risk assessment and management.
This will lead to greater integration of these properties into the harmonized classification and labeling system. This is significant because the entries included in Annex VI establish classifications that must be applied throughout the European Union, regardless of any individual decisions made by different economic operators.
The European Commission is proposing two complementary amendments. The first targets Part 3 of Annex VI, which contains the harmonized classification and labeling entries for substances. The second introduces new technical notes in Part 1, aimed at clarifying how specific substances must be identified and how classification rules apply to mixtures containing them.
Siloxanes, bisphenols, phthalates and fluorinated substances
The draft regulations encompass a range of chemical families, including substances employed across various industrial sectors, from the formulation of materials and coatings to the production of polymers, consumer goods, and chemical specialties.
Among the siloxanes listed are compounds such as octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), which are utilized in diverse applications related to silicones and industrial formulations.
The proposal also covers several bisphenols and phenolic compounds, including bisphenol A (BPA), bisphenol S (BPS), and bisphenol B (BPB), alongside specific nonylphenols and octylphenols. These substances play a significant role in the manufacturing of polymeric materials, resins, additives, and other chemical products.
Phthalates such as DEHP, DBP, BBP, and DIBP, historically used as plasticizers, are also included, along with certain ultraviolet absorbers designed to shield materials from degradation caused by solar radiation. References to specific agents like UV-326, UV-327, UV-329, and UV-350 appear within this latter category.
The scope of the proposal also covers specific perfluorinated compounds, including PFOA and PFHxS along with certain of their salts, as well as chlorinated paraffins, brominated flame retardants, and specific polycyclic aromatic hydrocarbons.
The inclusion of these substances does not imply that they will all receive identical classifications or that each one simultaneously exhibits all the properties under consideration. Hazard categories are assigned individually based on the respective assessments and the corresponding entries, meaning it will be necessary to consult the detailed information for each substance in the annexes of the draft regulations.
New specifications for the classification of substances and mixtures
One of the most industrially significant elements is contained in the second draft, which introduces new notes into Annex VI to streamline the practical application of harmonized classifications.
A key proposal involves specific siloxanes, such as D5 and D6, which clarifies the conditions under which the PBT classification applies, contingent on the presence of D4. Specifically, the text stipulates that if it can be demonstrated that the D4 content is below 0.1% by weight, the corresponding assessment must be conducted in accordance with CLP criteria.
Another clarification pertains to entries that group various substances. The proposed new note allows for more specific identification of the compound present, provided the supplier can determine its identity and a corresponding identification number exists. This refinement may be relevant for enhancing the traceability of raw materials and the documentation accompanying chemical products.
The draft also introduces additivity rules for specific substances listed within the same entry or across related entries. Under the scenarios outlined, the concentrations of individual components must be aggregated to determine whether a mixture meets the thresholds that trigger a hazard classification.
This issue carries particular weight for formulators, as the assessment of a mixture does not always hinge solely on the individual concentration of each ingredient. The combined presence of certain substances can alter the classification outcome, with direct implications for the information that must be conveyed to professional users and customers.
Implications for manufacturers, importers, and formulators
Although the proposals are not yet final legislation, their content offers a preview of the compliance work that companies marketing substances and mixtures in the European market may need to undertake.
Key tasks to consider include identifying affected raw materials, reviewing product compositions, and analyzing the new concentration rules applicable to specific mixtures. Companies will also need to assess the potential impact on safety data sheets, labeling, technical documentation, and internal systems for managing regulatory compliance.
For manufacturers of specialty chemicals, paints, coatings, polymers, adhesives, and industrial formulations, access to accurate information regarding the identity and concentration of substances in raw materials will be particularly critical. Collaboration with suppliers and customers may prove essential for anticipating potential changes in classification.
The draft regulations also outline distinct implementation timelines. The proposal concerning new classification entries includes an adaptation period of approximately 18 months prior to mandatory enforcement. In contrast, the technical notes project does not feature a similar transition phase, requiring companies to independently track the progress and final deadlines for both documents.
A new phase in the evolution of the European chemicals framework
The update arrives at a time of significant change within the European regulatory framework. Over the past few years, the European Union has revised the CLP Regulation to include new hazard classes, covering endocrine disruptors and PBT, vPvB, PMT, and vPvM substances, while simultaneously promoting administrative simplification through the Omnibus VI package.
Against this backdrop, the new proposal aims to strengthen the consistency of harmonized classifications and leverage assessments already conducted under various legislative instruments. For the industry, the challenge will lie in integrating these changes into raw material evaluation, formulation, and hazard communication processes, all while keeping a close eye on the evolving restrictions and requirements applicable to each chemical family.
The public consultation, which remains open until November 24, now offers companies, sectoral associations, and other stakeholders the opportunity to submit technical observations regarding the scope and implementation of the measures before the Commission moves forward with its final adoption.

Chnchemicals take
This regulatory update creates significant compliance complexity for chemical manufacturers and traders operating within the European Union. The expansion of the harmonised classification table to include endocrine disruptors and persistent substances requires companies to re-evaluate their product portfolios and update safety data sheets. Supply chain participants must prepare for the administrative burden of aligning with these new criteria before the 2027 adoption date to avoid market access disruptions.
Frequently asked questions
How many chemical substances are affected by the new European Commission CLP regulation drafts?
The draft regulations affect approximately 107 chemical substances. These updates include adding 49 new entries and modifying or replacing 58 existing entries in the harmonised classification table.
What specific hazardous properties are being integrated into the CLP classification system under these new drafts?
The drafts integrate properties such as endocrine disruption, persistence, bioaccumulation, and toxicity (PBT). They also cover very high persistence and bioaccumulation (vPvB) for both human health and environmental safety.
When is the adoption of the new CLP classification texts scheduled to occur?
The adoption of the texts is scheduled for the second quarter of 2027. The public consultation period for these proposals remains open until November 24, 2026.